click to enlarge
attaches to Ball Valve
Ball Valve Reducer for 1.5 inch Ball Valve
When you want to reduce the size of flow and have more precise control when filling smaller containers and molds, we recommend our Ball Valve Reducer. It easily connects directly to the Large 1.5 " Ball Valve on your jacketed tank.
Description:
- Using this reducer saves you considerable time. It makes it easy to fill your jars, bottles, soap molds or candle molds directly from your tank instead of pouring your products from the tank into a smaller vessel before filling.
- Connects right into our 1.5" (38mm) Ball Valve and reduces flow down to 3/8" (10mm). You use the Ball Valve Reducer to turn the flow on and off.
- This is the perfect option for smaller growing businesses not quite ready for our Willow Way Easy Fill Bottler.
- A much more efficient method that is a lot less messy 🙂
Specifications:
- Reduces from the 1.5" (38mm) Ball Valve to a smaller 1/2" (13mm) Ball Valve with 3/8" (10mm) flow.
- Ready to install! Fully assembled - no Teflon tape or pipe cement is needed to attach to the 1.5" Ball Valve.
- Suitable for temperatures up to 220 F (104 C).
- Can withstand most alkalis and acids.
Instructions for using Ball Valve Reducer:
- 1st make sure the reducer valve is in closed position before installing.
- Thread the reducer into the large ball valve. Only hand tight is necessary so its easy to remove.
- Plastic to plastic makes an excellent seal without needing Teflon tape. It does not need to be extremely tight.
- Open the large 1.5" ball valve and then just start dispensing with the small ball valve on the reducer.
- When you are finished dispensing, Close the Big Valve and unscrew the reducer to remove.
- Very simple to clean - Run a twisted up piece of rag or dowel rod through the opened ball valve in the reducer to clean most of your product out and then just wash and you're ready to run your next batch.
All prices are USD. Adding items to cart will redirect you to our secure shopping cart at soapequipment.com
